global strength. Personal Service.

TWIN LOC COILED BATTEN BAR

TWIN LOC COILED BATTEN BAR

TWIN LOC COILED BATTEN BAR

The Twin Loc Coiled Batten Bar is precision formed from .040” thick Galvalume® coated steel to prevent corrosion. The 100 ft. long, 1” wide coils include pre-punched holes 3” on center. Ends are rounded and edges deburred. It is approved for attachment to lightweight insulation concrete (LWIC), wood fiber/tectum, or poured gypsum roof decks. Designed for use with various length Twin Loc tubes (1.4”, 1.8”, 2.8”, 3.8”, 4.8”).

CODE APPROVALS & LISTINGS
FM Global and Miami-Dade County Approvals
MATERIAL
Steel
COATING
Galvalume

The Twin Loc Coiled Batten Bar is precision formed from .040” thick Galvalume® coated steel to prevent corrosion. The 100 ft. long, 1” wide coils include pre-punched holes 3” on center. Ends are rounded and edges deburred. It is approved for attachment to lightweight insulation concrete (LWIC), wood fiber/tectum, or poured gypsum roof decks. Designed for use with various length Twin Loc tubes (1.4”, 1.8”, 2.8”, 3.8”, 4.8”).

The Twin Loc Coiled Batten Bar is precision formed from .040” thick Galvalume® coated steel to prevent corrosion. The 100 ft. long, 1” wide coils include pre-punched holes 3” on center. Ends are rounded and edges deburred. It is approved for attachment to lightweight insulation concrete (LWIC), wood fiber/tectum, or poured gypsum roof decks. Designed for use with various length Twin Loc tubes (1.4”, 1.8”, 2.8”, 3.8”, 4.8”).

Part / LengthPart #Qty / Carton Carton Wgt.Qty / Skid
Twin Loc Coiled Batten BarBB-20R-3100 ft.13 lbs.4,000 ft.
NOTE: Twin Loc Coiled Batten Bar is always plus freight unless accompanied by a 25m piece Twin Loc-Nail w/o plate order.